I’ve been sprucing up the front porch over the last month or so. Lots of projects to keep me busy for sure. I added some pretty black and white striped cushions to my bench and chairs. Almost immediately I knew that I wanted some hot pink throw pillows added to them for some color. Except I couldn’t find hot pink pillows that were the color, fabric, or price range I wanted. It quickly became apparent that I was going to be making them. So today I’m sharing how to make outdoor throw pillows on a budget!

Here’s what you will need:
Napkins  18 x18″ , 2 per pillow
Pillow form 16 x 16″
Sewing Machine
Thread
Pins
Scissors
Scotchgard

First of all, this project is so easy it’s almost ridiculous, and using the same steps below, you could make these a no sew project. Just use a heat n bond type tape or fabric glue! I found my napkins here.

They had a 12 pack of 18 x 18, 100% cotton napkins  for $17.81 Which would make each napkin $`1.48. You will need two napkins so we multiply the $1.48 x 2 = $2.96

Step 1:

Wash and iron your napkin. Once that is done, lay napkins right side out, one on top of the other. Pin all the way around leaving a 6 – 8 inch opening.

Step 2:

Sew along the previously sewn hem line all the way around the napkins, leaving a 6 to 8 inch opening for the pillow to be inserted through. If you miss sewing along the hem line perfectly, no worries. You won’t see it when it’s done.

Step 3:

Remove the pins. Stuff your pillow form into the opening. I found my pillow forms here, each cost me $4.74. The pillow forms cost Make sure the pillows forms corners fill the corners of the pillow cover and that the pillow form is evenly distributed.

Step 4:

Once you have your pillow form inserted into the pillow cover, at the 6 -8 inch opening put the outer edges of the pillow cover together and pin. Make sure that your pillow is not in the opening! Sew the opening shut.

Step 5:

Once I had made all of my pillows, it was time to Scotchgard them. Following the directions on the can, I gave each pillow a solid coat of Scotchgard on both sides.

Let completely dry.

I placed mine outside on a table to dry.  As my  young niece would say “ooohhhh, stinky!”

LOL

It will definitely fill your house with that chemical smell!

Step 6:

Put them outside! Total time to make? I have to say that the sewing part of my pillows took me around 1 hour. Not bad at all. Waiting for the Scotchgard to dry took the longest in this process. Probably a half of a day.

Cost? The napkins per pillow were $2.96. The pillow forms per pillow were $4.74. The Scotchgard I had on hand, however you can buy this at any grocery or big box store for around $6.00 per can. My can was almost new when I started and I would say I used about 1/2 of a can for all of my pillows. So estimated cost: $3.00. So .75 per pillow. Total cost per pillow: $8.18!

I can honestly say that’s how to make an outdoor throw pillow on a budget!

Until next time….

Don’t forget to PIN it to read later!